Lochblenden in neuen Größen – Pinholes in new sizes

Zum Start der neuen Saison – wir bieten Lochblenden in weiteren Größen an

 

Wir haben soeben die Lieferung unserer Lochblenden in neuen Größen von unserer Fabrik (aus Deutschland) erhalten. Damit sind wir jetzt in der Lage, alle Größen von 0.100 bis 1.100mm anbieten zu können. Besonders bei den kleineren Lochblenden für spiegellose Systemkameras ist die Nachfrage groß, diese sind jetzt in den genau abgestimmten Größen zwischen 0.100 und 0.200mm lieferbar.

Das Herzstück des Lochkameraobjektivs, nämlich das Loch selbst bzw. dessen Beschaffenheit ist entscheidend für eine hohe Bildqualität. Die ideale Lochblende erfüllt die folgenden drei Vorraussetzungen:

Materialstärke: so dünn wie möglich, aber von hoher Festigkeit
Beschaffenheit des Lochs: absolut rund und gratfrei
Lochgröße: entsprechend der jeweiligen Brennweite bemessen

Die Bildqualität steigt in dem Maße, wie diese drei Vorbedingungen erfüllt werden können. Dabei spielt sowohl das verwendete Ausgangsmaterial, als auch der Produktionsprozess eine wichtige Rolle. Lochblenden aus Kupfer oder Aluminium sind wegen Korrosionsanfälligkeit bzw. zu geringer Reißfestigkeit nur bedingt als Lochkameraobjektiv geeignet, dafür aber billig in der Herstellung. Diese Lochblenden finden deshalb oft in sogenannten Body-Caps oder Spielzeugkameras Verwendung. Ist deren Material zu dick, so kommt es bei den Aufnahmen zu einem Tunnelblick und Unschärfe. Zudem wirken sich hier Sprödigkeit des Materials und Korrossionsprobleme negativ auf die Lochbeschaffenheit und Bildqualität aus. Schon bei geringen mechanische Einwirkungen wie z.B. bei der Reinigung mit Druckluft kommt es schnell zu Einrissen und Veränderung der Lochbeschaffenheit.Die Lochblenden von Skink Pinhole Pancake™ werden in industrieller Fertigung aus einem ungewöhnlich dünnem (30µm) und zudem äußerst festem Stahlsubstrat (high tensile strength >1600 N/mm2) in Deutschland hergestellt. Kupfer und Aluminium haben vergleichsweise eine wesentlich geringeren Zugfestigkeit von nur 200 N/mm2 bzw. 90 N/mm2 und sind deshalb für die Herstellung von dünnen Lochblenden nicht geeignet.

Unsere Lochblenden werden vor dem Versand nochmals einzeln unter dem Mikroskop kontrolliert.

At the start of the new season – we are offering pinholes in new sizes

We just received our delivery of pinhole apertures in new sizes from our factory in Germany. We are now able to deliver all sizes between 0.100 bis 1.100mm. Especially for mirrorless system cameras demand is high and we can now also offer exact sizes between 0.100 und 0.200mm.

The heart of your pinhole lens, the pinhole itself or its physical properties, ultimately determine image quality. There are three prerequisites for the ideal pinhole aperture:

Material thickness: as thin as possible, but of high tensile strength
Pinhole properties: absolutely round and burr-free
Pinhole size: in accordance with a given focal length
 

Image quality increases to the extent, that the a.m. prerequisites are met. Both, the material chosen and the production process play an important role to achieve the above. The usability of pinhole apertures made of copper or aluminium material is limited to toy cameras and low-end pinhole-body-caps, because such apertures are not thin enough to render sharp images (tunnel view) and in addition are easily affected by corrosion which have a negative effect on image quality. Little mechanical impact as for example caused by compressed air, easily tears or ruptures the pinhole. The pinhole apertures of Skink Pinhole Pancake™ are made in Germany with high-end production equipment using very thin (30µm), yet extremely strong steel substrate with high tensile strength of >1600 N/mm2. In comparison, the tensile strength of copper or aluminium of just 200 N/mm2 or 90 N/mm2 respectively, is not adequate for the production of thin pinhole apertures. Pinhole size matters too. It should match the focal length of the camera (distance between pinhole and sensor/ film) exactly. Striving for perfection, we choose pinhole sizes according to the established formula of English physicist Lord Rayleigh in steps – by (10µm) accuracy.

Only correctly designed, absolutely round and burr-free pinholes, made of corrosion-free steel-substrate with high tensile strength, fulfill the preconditions for optimal image quality.


Lochblenden – In folgenden Größen Mikrometer (µm) lieferbar:
Pinhole Apertures – available sizes in micron (µm ):

100µm 110µm 120µm 150µm 160µm 170µm 180µm 190µm 200µm 210µm 220µm 230µm 240µm 250µm 260µm 270µm 280µm 290µm 300µm 310µm 320µm 370µm 380µm 400µm 420µm 500µm 600µm 700µm 800µm 900µm 1000µm 1100µm
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128  Scroll to top